Chapter 7 - Resetting And Factory Settings; General System Reset; To Reset Factory Settings - Pentair Pool Products Nocchi CPS 10 Use And Maintenance Manual

CHAPTER 7 - RESETTING AND FACTORY SETTINGS

7.1 GENERAL SYSTEM RESET

Triggers a general module reset and reloads set values saved in eeprom. Press as a last resort only in order
to restart the module. If, for whatever reason, the module becomes blocked, wait approximately 10 seconds
for the module itself to automatically launch a general reset. If this does not reset the system, use this key
and contact a customer care centre.
Reset key sequence

7.2 TO RESET FACTORY SETTINGS

The factory values can be loaded by pressing a sequence of keys.
Key sequence
To reset settings
x
Press only as a last resort to restart the system
x
Loads all default values and deletes all previous values entered.
DOWN", "ESC", "ARROW DOWN", "ESC", "ARROW DOWN", "ESC", press for 10
Page 22 of 30
Press SET for 20"
seconds
Press the SET key to confirm reset
22 - GB -
49