Table of Contents
Advertisement
CHAPTER 5 - PROGRAMMING
5.1
CONTROL PANEL DESCRIPTION
The control panel is shown in fig. 1
Press the START/STOP button to start and/or stop the pump.
5.2
DESCRIPTION OF SIGNALS ON DISPLAY
When running normally (that is, in the absence of any alarms) press the MODE button to alternate the
various displays available:
1. m/PSI Æ Visualizzazione della head
-
Current pressure or head, shown in large numbers on the display.
-
Currently active set point (dPcn, dPvn or Frqn with n=1 or 2), shown in small numbers on the
display.
-
Unit of measurement for pressure or head (PSI))
-
Frequency graph indicator.
-
Day of the week.
-
Master (P) or Slave (S), only for unit configuration.
2. Hz
-
Current frequency of the pump in Hz.
-
Frequency graph indicator
42
Æ Motor frequency
Page 12 of 13
fig.1
12
12 - GB -
Advertisement
Table of Contents
