IBM RS/60000 Series Site And Hardware Planning Information page 52

Note: Rack units are large and heavy and are not easily moved. Because maintenance activities require
access at both the front and back, extra room needs to be allowed. The footprint shows the radius
of the swinging doors on the I/O rack. The illustration shows the minimum space required.
T00 and T42 Racks Multiple Attachment
T00 racks or T42 racks can be bolted together in a multiple rack arrangement as shown above. A kit is
available including the bolts, spacers, and decorative trim pieces to cover the 25.4mm (1 in.) space. For
service clearances, see the service clearances as shown in the table for the "Model T00 Rack" on page
31.
34
Site and Hardware Planning Information
T00 T00
or or
T42
T42
Rack Rack
Separation
25.4 mm
(1 in.)