IBM RS/60000 Series Site And Hardware Planning Information page 124

A
Rear
B
B
Front
C
Dimension
Rack
Entry/Exit
(Mm)
Rear 117 x 403 4.6 x 15.9
Raised Floor with 610-mm (24-inch) Floor Panels
Securing the Rack
The following can be ordered by the customer as additional rack-securing options for the Eserver pSeries
655.
v RPQ 8A1183 for attaching the rack-mounting plates to the concrete floor (non-raised floor)
v RPQ 8A1185 to attach the rack to a concrete floor when on a raised floor (9 1/2 inches to 11 3/4 inches
high)
v RPQ 8A1186 to attach the rack to a concrete floor when on a raised floor (11 3/4 inches to 16 inches
high)
Positioning the Rack: To unpack and position the rack, do the following:
1. Remove all packing and tape from the rack.
2. Position the rack according to the customer floor plan.
3. Lock each caster wheel by tightening the thumbscrew on the caster.
Thumbscrew
106
Site and Hardware Planning Information
B
178 mm (7 in.)
Recommended for Non-Reinforced Pedestal Type
B
C
(in)
432 mm (17 in.)
Recommended for Reinforced Pedestal or Stringer Types
610 mm (24 in.)
A
356 mm (14 in.)
610 mm (24 in.)
A
B
Uncut Panels
C
Perforated Panels