220, And 230 - IBM RS/60000 Series Site And Hardware Planning Information

7011 POWERstation and POWERserver
Dimensions
Height
Width¹
Depth
Weight
Minimum
Maximum
Electrical
Power source loading
(typical in kVA)
Voltage range (V ac)
Frequency (hertz)
Thermal output
(typical)
Power requirements
(typical)
Power factor
Inrush current
Maximum altitude
Temperature
Requirements
Humidity
Requirements
(Noncondensing)
Wet Bulb
Noise Emissions²
L
WAd
L
pAm
<L >
pA m
Impulsive or
prominent discrete
tones
Clearances³
4,5
Install/ Air Flow
Service
4
Footprint
Desktop
Deskside
1. Deskside width measurement includes the optional vertical stand.
2. See "Noise Emission Notes" on page 336 for definitions of noise emissions positions.
3. Left and right measurements apply only when the system is used in the desktop position.
4. The amount of space needed by the unit during normal operation is indicated by the footprint dimensions.
5. When placed in the vertical position, the Model 220 requires 25 mm (1 in) at the bottom and top for proper air
flow. The necessary bottom clearance is provided by the optional vertical stand.
16
Site and Hardware Planning Information
Desktop
84 mm
406 mm
419 mm
100 to 127 or 200 to 240 (autoranging)
50 amps at 120 V ac, 100 amps at 240 V ac
Operating
16 to 32°C
(60 to 90°F)
Operating
8 to 80%
23°C (73°F)
Operating
5.2 bels
41 dBA
39 dBA
No
Front
35mm(1.5 in) 51mm(2 in)
466mm(18 in)
Width
456mm(18 in)
216mm(8.5 in)
®

220, and 230

3.3 in. 432 mm
16.0 in. 216 mm
16.5 in. 419 mm
9.0 kg 20 lbs.
11.5 kg 25 lbs.
0.17
50 or 60
340 Btu/hr
100 watts
0.5 to 0.7
2135 m (7000 ft.)
Back Left
25mm(1 in)
N/A N/A
Deskside
17.0 in.
8.5 in.
16.5 in.
Non-Operating
10 to 43°C
(50 to 110°F)
Non-Operating
8 to 80%
27°C (80°F)
Idle
5.0 bels
40 dBA
38 dBA
No
Right
25mm(1 in)
N/A
Width
508mm(20 in)
508mm(20 in)