IBM RS/60000 Series Site And Hardware Planning Information page 362

Multiphase PDUs With Power Cords
The feature codes in the following table have a PDU and a power cord. The power cord has a receptacle
for connection to the PDU plug.
Feature Code for
PDU with Power
Cord
6173
9173 Except for S70,
S7A, and S80 CEC
Racks. See notes.
6174
9174 For S70, S7A,
and S80 Racks. See
Notes.
7178
9178
Notes:
1. When an S70, S7A, S80, or S85 CEC is ordered with feature code (FC) 9173, it is supplied with a 16
amp IEC 309 plug. All other racks ordered with FC 9173 are supplied with a 32 amp IEC 309 plug.
2. For power cord information on the Eserver pSeries 690, refer to "Power and Electrical Requirements"
on page 163.
Single Phase PDUs and Power Cords
Separate power cords are available for the PDUs listed in the following table.
PDU Power Cord
Feature Feature
Code Code
9171
6171
9823
9177
7177
9171
9800
6171
9824
9176
9986
7176
9171
6171 9801
9176 9987
7176
344
Site and Hardware Planning Information
Power Cord
PDU Plug
Receptacle to PDU
PDU Plug
Receptacle to PDU
Power Cord Plug to
Wall
Power Cord Power Cord Plug to
Standard
Compliance or Type
IEC 309
380-415 V, 32 A
IEC 309
380-415 V, 16 A
Standard
Compliance or
Wall
Type
IEC 309
220 to 240 V, 32 A
NEMA WD-5
L6-30P
250 V, 30 A
R & S 3750
250 V, 30 A