where <n> = 1, 2 (TRAANG data set number)
2.3.2.2
Axis configuration
The following shows an axis configuration that is typical of TRAANG.
①
Machine axis name
● MD10000 $MN_AXCONF_MACHAX_NAME_TAB[ 0 ] = "CM"
● MD10000 $MN_AXCONF_MACHAX_NAME_TAB[ 1 ] = "UM"
● MD10000 $MN_AXCONF_MACHAX_NAME_TAB[ 2 ] = "ZM"
● MD10000 $MN_AXCONF_MACHAX_NAME_TAB[ 3 ] = "ASM"
Transformations
Function Manual, 06/2019, A5E47435470B AA
2.3 Oblique angle transformation (inclined axis) TRAANG (option)
Effective if TRAANG is active.
M1: Kinematics transformation
69