M1: Kinematics Transformation; Transmit Face End Transformation (Option); Function; Introduction - Siemens SINUMERIK 840DE sl Function Manual

M1: Kinematics transformation

2.1

TRANSMIT face end transformation (option)

2.1.1

Function

2.1.1.1

Introduction

Note
The "TRANSMIT and peripheral surface transformation" option that is under license is required
for the function "End face transformation (TRANSMIT)."
The TRANSMIT transformation permits end face machining (drill holes, contours) on turning
machines.
A Cartesian coordinate system can be used to program these machining operations.
The controller transforms the programmed traversing movements of the Cartesian coordinate
system to the traversing movements of the real machine axes.
Standard case:
● Rotary axis
● Infeed axis, perpendicular to rotary axis
● Longitudinal axis, parallel to rotary axis
● The linear axes are perpendicular to one another.
Transformations
Function Manual, 06/2019, A5E47435470B AA
2
19