Required Tools - Enterasys 7100G Series Hardware Installation Manual

This appendix describes the installation and use of the optional 7100 Universal Rack Mount Kit,
model number 71A-RACK-U. This optional rack mounting kit provides for flexible mounting
options in both 4-post and 2-post rack installations.
For information about...

Required Tools

Contents of Mounting Kit
Installation Site Requirements
Required Order of Installation
Removing the Rack Mount Ears from the 7100G-Series Chassis
Installing the Adapter Plates
4-Post Rack Mount Installation
2-Post Rack Mount Installation
Required Tools
• ESD wrist strap (included with the 7100G-Series chassis)
• Phillips screwdriver
Electrical Hazard: Only qualified personnel should perform installation procedures.
Riesgo Electrico: Solamente personal calificado debe realizar procedimientos de instalacion.
Elektrischer Gefahrenhinweis: Installationen sollten nur durch ausgebildetes und qualifiziertes
Personal vorgenommen werden.
Risques d'électrocution: Seul un personnel qualifié doit effectuer les procédures d'installation.
Optional Rack Mount Rail Kit
Enterasys 7100G-Series Hardware Installation Guide C-1
C
Installation
Refer to page...
C-1
C-2
C-2
C-3
C-3
C-3
C-5
C-7