71G21K2L2-24P24; 71G21K2L2-24P24 I/O Port Panel; 71G11K2L2-48 I/O Port Panel - Enterasys 7100G Series Hardware Installation Manual

71G21K2L2-24P24

71G21K2L2-24P24
The 71G21K2L2-24P24 has twenty-four 100Mb/1Gb SFP ports, twenty-four 10/100/1000 PoE (.at+
.af capable) RJ45 ports, two 1/10Gb SFP+ ports and two 10/40Gb QSFP+ ports, as shown in
Figure 1-2.
Figure 1-2
1 COM port
2 System LEDs
3 100Mb/1Gb SFP ports
4 10/100/1000 PoE (.at+.af capable) RJ45 ports 9
5 1/10Gb SFP+ ports
Each of the 100Mb/1Gb SFP and 10/100/1000 PoE (.at+.af capable) RJ45 ports operate in full-duplex
mode.
The SFP+ and QSFP+ ports support a number of pluggable transceivers. For more information
about the transceivers, see the following:
http://www.enterasys.com/products/transceivers-ds.pdf
71G11K2L2-48
The 71G11K2L2-48 has forty-eight 100Mb/1Gb SFP ports, two 1/10Gb SFP+ ports and two 10/40Gb
QSFP+ ports, as shown in
Figure 1-3
1 COM port
2 System LEDs
3 100Mb/1Gb SFP ports
4 1/10GBASE-T RJ45 ports
Each of the 100Mb/1Gb SFP ports operate in full-duplex mode.
The SFP+ and QSFP+ ports support a number of pluggable transceivers. For more information
about the transceivers, see the following:
http://www.enterasys.com/products/transceivers-ds.pdf
1-2 Introduction

71G21K2L2-24P24 I/O Port Panel

Figure 1-3.

71G11K2L2-48 I/O Port Panel

6 10/40Gb QSFP+ uplink ports
7 Ground receptacle
8 PoE LED button
Micro-USB port
10 OFFLINE/RESTART button
5 10/40Gb QSFP+ uplink ports
6 Ground receptacle
7 Micro-USB port
8 OFFLINE/RESTART button