Securing The 7100G-Series Switch To The Rack; Mid-Mount Power Supply Front Configuration - Enterasys 7100G Series Hardware Installation Manual

Mounting the 7100G-Series Switch
Figure 2-6
1 Ear mount screw removal
2 Reposition of rack mount ear

Securing the 7100G-Series Switch to the Rack

To secure the 7100G-Series switch to the rack:
1. Ensure that the rack mount ears are properly installed based upon the discussion in section
"Rack Mount Ear
2. Align the rack mount ear holes with the front rack post holes in either a flush
mid-mount
2-10 Installation

Mid-Mount Power Supply Front Configuration

Warning: Before rack-mounting the device, ensure that the rack can support it without
compromising stability. Otherwise, personal injury and/or equipment damage may result.
Advertencia. Antes de montar el equipo en el rack, asegurarse que el rack puede soportar su peso
sin comprometer su propia estabilidad, de otra forma, daño personal o del equipo puede ocurrir.
Warnhinweis: Überzeugen Sie sich vor dem Einbau des Gerätes in das Rack von dessen
Stabilität, ansonsten könnten Personenschäden oder Schäden am Gerät die Folge sein.
Avertissement: Avant de monter l'appareil sur le bâti, assurez-vous que l'étagère peut en
supporter le poids sans en compromettre la stabilité. Cela pourrait, dans le cas contraire, entraîner
des blessures ou des dommages matériels.
Notes: The rack mounting ear provides three holes for securing the 7100G-Series switch to the
rack. Use at least two screws or fasteners appropriate to your rack on each side when securing the
7100G-Series switch to the rack.
It is recommended that power supplies be installed after the 7100G-Series switch has been secured
to the rack to minimize weight that must be supported when installing rack screws.
Positioning" on page 2-7.
(Figure 2-8 on page 2-11) configuration.
3 Ear mount screw insertion
(Figure 2-7) or