Creating A Chain Set - Roland FANTOM Series Reference Manual

Creating a Chain Set

Here's how to create an original chain set .
1.
Press the [SCENE CHAIN] button.
The SCENE CHAIN screen appears .
2.
Touch the <CHAIN SET> name to switch to an
empty chain set.
3.
Touch <EDIT>.
The SCENE CHAIN EDIT screen appears .
4.
Touch <Select Scene>.
The SCENE SELECT screen appears .
Menu Explanation
[E1] knob Switches the scene bank .
[E5] CANCEL Cancels .
[E6] OK Confirms the selected scene .
5.
Highlight the scene that you want to register.
Recalling Scenes in the Order of Songs (Scene Chain)
6.
Select [E6] OK to confirm the selected scene.
You return to the SCENE CHAIN EDIT screen .
Note that the selected scene is registered as the first scene .
If you want to re-select a different scene for the registered
position, you can touch <Select Scene> from this state, and re-
select the scene .
7.
To register the second scene, touch the box
that contains the word <Next>.
The position to be registered moves one place to the right, and
the Next box is highlighted .
8.
Repeat steps 4–6 to register the necessary
scenes.
Scenes are registered consecutively from the left edge toward
the right . Register as many scenes as necessary . Up to 512 scenes
can be registered in a chain set .
9.
If you want to edit the name of the chain set,
touch <RENAME> and edit the name.
When you have edited the name, select [E6] OK to close the
window .
10.
To save the scene, touch <WRITE>.
The chain set is saved, and you return to the SCENE CHAIN
screen .
NOTE
When you save, the data previously located in the save-destination is
overwritten .
61