Connecting A Computer Via Usb; Connecting To Your Computer; Usb Driver Settings; Performing Live With A Plug-In Synthesizer - Roland FANTOM Series Reference Manual

Connecting a Computer via USB

Connecting to Your Computer

The USB driver is software that transfers data between your
computer software and this unit .
You must install the USB driver in order to use this unit
connected to your computer .
MEMO
For details on downloading and installing the USB driver, refer to the Roland
website .
https://www .roland .com/support/

USB Driver Settings

Here's how to specify the USB driver that's used when
connecting to your computer .
1.
Press the [MENU] button.
2.
Touch <SYSTEM>.
3.
Touch <GENERAL> tab.
4.
Set the "USB Driver" parameter to "VENDOR."
Parameter Value
VENDOR
USB Driver
GENERIC
5.
Press the [WRITE] button to save the SYSTEM
settings.
6.
Turn this unit's power off, and then on again.

Performing Live with a Plug-In Synthesizer

You can use the FANTOM to play a plug-in synthesizer that's
installed on your computer . In this case, you can route the
audio output of your plug-in synthesizer via USB audio into
the FANTOM, so that it is heard from the OUTPUT jacks of the
FANTOM .
Performance using
Internal zones
Performance data for external
zones
(USB MIDI)
Plug-in synthesizer
installed on the computer
102
Explanation
Choose this if you want to use a USB driver
downloaded from the Roland website .
Choose this if you want to use the standard USB
driver that was included with your computer .
* Only MIDI is available.
Audio from the
computer (USB audio)

Using USB Audio

Adjusting the USB Audio Input

Here's how to make settings for audio that's input from a USB-
connected computer .
1.
Press the [USB AUDIO SELECT] button.
The SYSTEM screen's USB tab appears
2.
Move the cursor to "USB Audio Input Switch,"
and change the value to "ON."
Audio input from the connected device turns on .
3.
Use the cursor to select "USB Audio Input
Volume," and adjust the input level.

Adjusting the USB Audio Output

Here's how to output the FANTOM's audio to a USB-connected
computer .
1.
Press the [USB AUDIO SELECT] button.
The SYSTEM screen's USB tab appears .
2.
Move the cursor to "USB Audio Output Switch"
and change the value to "ON."
Audio output to the connected device turns on .
3.
Use the cursor to select "USB Audio Output
Volume," and adjust the output level.
Output