Specifying The Output Destination For Usb Input; Specifying The Click Tone Output Destination - Roland FANTOM Series Reference Manual

Specifying the Output Destination for
USB Input
The FANTOM can input three stereo pairs of audio signals
via its USB COMPUTER port . Of these, the output destination
of USB SUB 1 is fixed as the SUB OUT 1 jacks, and the output
destination of USB SUB2 is fixed as the SUB OUT 2 jacks, but you
can choose the output destination jacks to which USB MASTER
is routed .
1.
In the EFFECTS EDIT screen, touch the <USB>
tab.
2.
Select the USB MASTER output destination
(USB Audio Input Destination 1).
The output destination changes according to this setting .
Specifying the Click Tone Output
Destination
Here's how to specify the output destination for the click that is
used when recording into the sequencer or when sampling .
1.
In the EFFECTS EDIT screen, touch the <CLICK>
tab.
In this screen you can also set the tempo .
2.
Select the click tone output destination (Click Output
Assign).
The output destination changes according to this setting .
Editing the Effects
57