If You're Using The Fantom-8 - Roland FANTOM Series Reference Manual

the FANTOM-8
If You're Using
If you want to place the FANTOM-8 on a stand, please use the KS-12, KS-10Z, or KS-G8B stands manufactured by Roland .
KS-12
KS-10Z
Align the front
of the FANTOM
with the front of
the stand
KS-G8B
Align the front
of the FANTOM
with the front of
the stand's upper
arm .
Adjust so that
the height does
not exceed one
meter .
Getting Ready
Adjust the horizontal width of the
stand so that the rubber feet on
the keyboard side of the FANTOM
fit into the holes that are provided
to accommodate them .
Top view
Adjust the horizontal width of the
stand as shown in the illustration .
730 mm
Top view
Align the center of the
FANTOM with the center
of the stand .
19