Deleting A Sample; (Delete); Deleting All Samples; (Delete All) - Roland FANTOM Series Reference Manual

Editing a Sample
1.
In the WAVE EDIT screen, specify the start
point and end point.
2.
Touch <SAMPLE UTILITY>.
The SAMPLE UTILITY window appears .
3.
Select <TRUNCATE>.
A confirmation message appears .
If you decide to cancel, choose [E6] CANCEL .
4.
Select [E5] OK.
The Truncate operation is executed .
Deleting a Sample (DELETE)
Here's how to delete a sample .
1.
In the SAMPLE PAD screen, touch <SAMPLE
UTILITY>. Alternatively, in the WAVE EDIT
screen, touch <SAMPLE UTILITY>.
The SAMPLE UTILITY window appears .
2.
Touch <DELETE>.
A confirmation message appears .
If you decide to cancel, select [E6] CANCEL .
3.
Select [E5] OK.
The sample is deleted .

Deleting All Samples

(DELETE ALL)

This deletes all samples of BANK 1–4 .
1.
In the SAMPLE PAD screen, touch <SAMPLE
UTILITY>.
The SAMPLE UTILITY window appears .
2.
Touch <DELETE ALL>.
A confirmation message appears .
If you decide to cancel, select [E6] CANCEL .
3.
Select [E5] OK.
All samples are deleted .
72

Exporting the Sample in WAV Format

(EXPORT WAV)

Here's how to export the sample in WAV format .
1.
In the SAMPLE PAD screen, touch <SAMPLE
UTILITY>. Alternatively, in the WAVE EDIT
screen, touch <SAMPLE UTILITY>.
The SAMPLE UTILITY window appears .
2.
Select <EXPORT (WAV)>.
A confirmation message appears .
If you decide to cancel, choose [E6] CANCEL .
3.
Select [E5] OK.
The sample is exported .
4.
Select [E6] CLOSE to close the screen.
The exported WAV file is saved in the "EXPORT SAMPLE" folder of
the USB flash drive .
* If the export-destination contains a file of the same name, the message
"Duplicate File Name! Overwrite it?" appears. Select [E5] OK to
overwrite, or select [E6] CANCEL to cancel.
NOTE
Never turn off the power while data is being exported .
MEMO
5 By exporting after executing Truncate in the WAVE EDIT screen, you can
export the portion of the waveform that is between the start point and
the end point.
5 The exported WAV file is 48 kHz 16-bit format.

Exporting All Samples in WAV Format

(EXPORT ALL WAV)

Here's how all samples of BANK 1–4 can be exported in WAV
format .
1.
In the SAMPLE PAD screen, touch <SAMPLE
UTILITY>.
The SAMPLE UTILITY window appears .
2.
Select <EXPORT ALL (WAV)>.
A confirmation message appears .
If you decide to cancel, select [E6] CANCEL .
3.
Select [E5] OK.
All samples are exported .
4.
Select [E6] CLOSE to close the screen.
The exported WAV files are saved in the "EXPORT SAMPLE" folder
of the USB flash drive .
* If the export-destination contains a file of the same name, the message
"Duplicate File Name! Overwrite it?" appears. Select [E5] OK to
overwrite, or select [E6] CANCEL to cancel.
NOTE
Never turn off the power while data is being exported .
MEMO
The exported WAV files are in 48 kHz 16-bit format .