Operations In The Display; Scene Select Screen; Tone Edit Screen; Zone View Screen - Roland FANTOM Series Reference Manual

Operations in the Display

This unit's display is a touch panel; you can perform various
operations by directly touching the display . There are many
screens, but here we explain the typical screen operations .
5 A light touch with your finger is sufficient to operate the touch panel.
The touch panel might be damaged if you press it strongly, or if you
press it with a hard object. Do not use excessive force, and use only your
finger to operate it.
5 Text enclosed in square brackets [ ] indicates a button or knob on the
panel. Text enclosed in angle brackets < > indicates a button, knob, or
icon in the display that you can "touch." Icons such as "OK" or "CANCEL"
that are shown in the lower part of the display and respond to the
[E1]–[E6] knobs as well as to touch in the display are expressed in this
document using a form such as "Select [E6] OK."
MEMO
If you lose track of which screen you're in, you can return to the SCENE SELECT
screen by pressing the [EXIT] button several times or by pressing the [SCENE
SELECT] button .
By touching the < > icon in the upper left of the screen, you can return to
the previous screen .
reen
SCENE SELECT Sc
Opens a menu .
Touch to select a
scene .
This shows information about the parameters that you can control using knobs [E1]–[E6] .
n
TONE EDIT Scree
Touch to turn a switch
Switches to the PRO
on/off or to select .
EDIT screen .
Touch to switch
between tabs . Swipe
to scroll .
Touch to move the cursor . Drag to
edit a value .
This shows information about the parameters that you can control using knobs [E1]–[E6] .
Touch to move between screens .
Switches to the next
(previous) page .
Touch to move
between screens .
Touch to select a
parameter .
Touch to close a
window .
Drag to edit a value .
n
ZONE VIEW Scree
Touch to move the
cursor .

MENU Screen

Returns to the screen of the next-higher level .
Touch to move
between screens .

RENAME Screen

Change the
Symbols
input position
een
REC STANDBY Scr
From the menu, use the [E4] knob to select a parameter, and confirm .
Basic Operation
Touch to turn a switch
on/off .
Touch to open
the list .
Touch to enter characters .
Cancel . Confirm .
Touch to open the list .
13