Pedal Settings (Pedal) - Roland FANTOM Series Reference Manual

Keyboard Settings
Parameter Value
Specifies the velocity transmitted when a key is played .
REAL
Keyboard Velocity
1–127
LIGHT
Keyboard Velocity Curve
MEDIUM
HEAVY
Keyboard Velocity Curve
-10–+9
Offset
Hi-Res Velocity Out OFF, ON
Aftertouch Sens
0–100
Arpeggio
Specifies how arpeggios will be triggered .
OFF
BEAT
Arpeggio Trigger
Quantize
MEAS
OFF/ON
Arpeggio Switch Mode
OFF/ON & ARP
SCREEN
OFF/ON
Chord Memory Switch
Mode
OFF/ON & CHD
SCREEN
(KEYBOARD)
Explanation
The transmitted velocity value will
correspond to the force with which
you strike the key .
The transmitted velocity value will
be fixed, regardless of the force with
which you strike the key .
The keyboard will have a
lighterfeeling touch . Since you'll be
able to reach fortissimo (ff ) without
having to play as strongly as with
the "MEDIUM" setting, the keyboard
will feel lighter . This setting makes it
easier for people with reduced finger
strength to play the keyboard .
This is the standard keyboard touch
setting .
The key will have a heavier-feeling
touch . Since you'll need to play more
strongly than with the "MEDIUM"
setting in order to reach fortissimo
(ff ), the keyboard will feel heavier . This
setting allows you to use your playing
dynamics to add more expression to
your performances .
Adjusts the keyboard velocity curve .
Lower values make the keyboard
feel lighter . Higher values make the
keyboard feel heavier .
Specifies whether high-resolution
velocity data is transmitted .
Specifies the aftertouch sensitivity .
Higher settings make it easier to apply
aftertouch . Normally you will leave
this at 100 .
The arpeggio starts the moment you
play the keyboard .
If you play the keyboard while the
sequencer or a rhythm pattern is
playing, the arpeggio automatically
starts at the beginning of the beat .
If you play the keyboard while the
sequencer or a rhythm pattern is
playing, the arpeggio automatically
starts at the beginning of the
measure .
The ARPEGGIO screen does not
appear when you operate the
[ARPEGGIO] button to change from
OFF to ON .
The ARPEGGIO screen appears when
you operate the [ARPEGGIO] button to
change from OFF to ON .
The CHORD MEMORY screen does not
appear when you operate the [CHORD
MEMORY] button to change from OFF
to ON .
The CHORD MEMORY screen appears
when you operate the [CHORD
MEMORY] button to change from OFF
to ON .
Pedal Settings
(PEDAL)
Parameter Value
Pedal Assign Source SYS, SCENE
Control Pedal
STANDARD,
Pedal1–3 Polarity
REVERSE
Specify the functions that are controlled by pedals
connected to the PEDAL CTRL 1, 2/L, 3/C jacks .
OFF
CC01–31,
33–95
BEND DOWN
BEND UP
AFT
START/STOP
TAP TEMPO
SCENE DOWN
Pedal1–3 Assign
SCENE UP
OCT DOWN
OCT UP
ARPEGGIO SW
CHORD MEM
SW
DEC
INC
Pedal1–3 Range Min 0–127
Pedal1–3 Range Max
0–127
Hold Pedal
STANDARD,
Hold Pedal Polarity
REVERSE
Continuous Hold Pedal
OFF, ON
Settings for the Entire FANTOM
Explanation
Specifies whether the functions
controlled by pedals connected to
the PEDAL CTRL 1, 2/L, 3/C jack are
determined by the system settings
(SYS) or by the settings of the scene
(SCENE) .
Selects the polarity of the pedal
connected to the PEDAL CTRL 1, CTRL
2/L, and CTRL 3/C jacks .
Depending on the model of pedal,
the result of depressing or releasing
the pedal might be the opposite of
what you expect . If so, choose the
"REVERSE" setting . If you're using a
Roland pedal (that has no polarity
switch), choose the "STANDARD"
setting .
No function is assigned .
Controller number 1–31, 33–95
The same effect as moving the pitch
bend lever to the left .
The same effect as moving the pitch
bend lever to the right .
Aftertouch
Start/stop the sequencer .
The same effect as pressing the panel
[TAP] button .
Switch the scene to the previous
number . When using a scene chain,
switch to the previous number in the
chain set .
Switch the scene to the next number .
When using a scene chain, switch to
the next number in the chain set .
The same effect as pressing the panel
OCTAVE [DOWN] button .
The same effect as pressing the panel
OCTAVE [UP] button .
The same effect as pressing the panel
[ARPEGGIO] button .
The same effect as pressing the panel
[CHORD MEMORY] button .
The same effect as pressing the panel
[DEC] button .
The same effect as pressing the panel
[INC] button .
Specify the lower limit value for the
range of the assigned function .
Specify the upper limit value for the
range of the assigned function .
Selects the polarity of the pedal
connected to the PEDAL HOLD/R jack .
Depending on the model of pedal,
the result of depressing or releasing
the pedal might be the opposite of
what you expect . If so, choose the
"REVERSE" setting . If you're using a
Roland pedal (that has no polarity
switch), choose the "STANDARD"
setting .
If this is ON, the PEDAL HOLD/R jack
will support half-pedaling . If half-
pedaling is enabled, you can connect
a damper pedal (such as the DP-10;
available separately) and use the
pedal to control subtle nuances of the
piano sounds you play .
113