Operation Command - Omron EasySpeed 3G3JV Series Communications Manual

CompoWay/F Communications Procedures
1.Test Data
Set between 0 and 23 bytes of user-defined test data.
Set a value for the test data within the ranges shown below according to the communications data
length.
Communications data length
8 bits
7 bits
Note Do not set the value H'40. No response will be returned if this value is included.
2.Response Code
Normal Completion
Response code
0000
Error Completion
Response code
1001
2203

Operation Command

The commands supported by the 3G3JE are listed in the following table. Refer to this table for com-
mand codes and related information.
Service Request PDU
Command
MRC SRC
code
3 0 0 5
2 2 2
Service Response PDU
MRC SRC Response code
3 0 0 5
2 2
ASCII data: H'20 to H'7E or H'A1 to H'FE
ASCII data: H'20 to H'7E
Name
Normal completion
Error name
Command too long
Operation error
Related
information
2
4
Test Data
Description
No errors were found.
Description
The command is too long.
CPU or EEPROM error
Chapter 2
2-13