Variable Area Setting Range List - Omron EasySpeed 3G3JV Series Communications Manual

Communications Data
3-1

Variable Area Setting Range List

The following table lists the data ranges for each type of variable. Refer to the individual items for
details.
Variable Type C0
Address Name
0000 Frequency reference
0001 Output frequency
0002 Output current
0003 Accumulated operat-
ing time
0004 Status
Variable Type C1
Address Name
0000 Frequency reference
0001 Frequency reference 1
0002 Frequency reference 2
0003 Frequency reference 3
0004 Frequency reference 4
0005 Acceleration time
0006 Deceleration time
0007 Application selection
• The unit for the frequency reference, output frequency, output current, accumulated operating time,
frequency references 1 to 4, acceleration time, and deceleration time is 0.1.
Examples:
0.7 →
00000007
H'
50.0 →
000001F4
H'
120 (120.0) →
000004B0
H'
• The frequency reference range depends on the frequency reference upper limit and the frequency
reference lower limit.
• The acceleration time, deceleration time, and application selection cannot be written during opera-
tion. (They can be read during operation.)
• 1 kh = 1,000 hours
3-2
Setting range Communications notation
0.0 to 120 H'00000000 to H'000004B0
--- H'00000000 to H'000004B0
--- H'00000000 to H'00000032
--- H'00000000 to H'000003E7
--- ---
Setting range Communications notation
0.0 to 120 H'00000000 to H'000004B0
H'00000000 to H'000004B0
H'00000000 to H'000004B0
H'00000000 to H'000004B0
H'00000000 to H'000004B0
0.1 to 999 H'00000001 to H'00002706
0.1 to 999 H'00000001 to H'00002706
0: Fan applica- H'00000000
tion or pump
H'00000001
application
1: Conveyor
application
Chapter 3
Default Unit
10.0 Hz
--- Hz
--- A
--- kh
--- ---
Default Unit
10.0 Hz
10.0 Hz
0.0 Hz
0.0 Hz
0.0 Hz
10.0 s
10.0 s
1 ---