4 WORK
4.22
4.23
34
Adjusting the headlight range
E00975-10
Setting the combination instrument
Info
When the vehicle is delivered, only the SPEED/H and SPEED/ODO display modes are activated.
400318-01
Guideline
A
Distance
–
The rider now sits down on the motorcycle with a full set of
protective clothing.
–
Turn the ignition key in the ignition lock to the position
–
Push the main switch into the position
–
Switch on the low beam.
–
Check the headlight setting.
The boundary between light and dark must be exactly on the
lower marking for a motorcycle with rider.
»
If the boundary between light and dark does not meet
specifications:
–
Adjust the headlight range.
Preparatory work
–
Check the headlight setting.
Main work
–
1
Loosen screw
.
–
Adjust the headlight range by pivoting the headlight.
Guideline
The boundary between light and dark must be exactly on the
lower mark for a motorcycle with rider (instructions on how
to apply the mark: Checking the headlight setting).
Info
A change in weight on the vehicle may require a correc-
tion of the headlight range.
–
1
Tighten screw
.
Condition
The motorcycle is stationary.
–
Repeatedly press the button
bottom right of the display.
–
Press the button
for 2–3 seconds.
The Setup menu is displayed and the active functions are
shown.
5 m (16 ft)
.
.
(
p. 34)
(
p. 33)
briefly until H appears at the