Advertisement
4 WORK
4.12
24
Info
The battery charger contains sensitive electronics and must be handled with appropriate care.
The battery charger may be damaged or destroyed if it is dropped, knocked or otherwise subject to
mechanical overload.
When transporting the battery charger, ensure appropriate means of securing the cargo.
Damage caused due to improper handling or improper transport is excluded from the manufacturer war-
ranty.
C00766-01
Checking residual current protection switch
K00031-10
–
Place the battery charger on a firm, level and horizontal sur-
face.
–
Ensure the battery charger is adequately ventilated.
Guideline
Free space at the front and
rear side of the battery
charger
–
Use the battery charger in the temperature range permitted.
Guideline
Ambient temperature
–
Ensure that the power plug for the battery charger always
remains easily accessible.
Warning
Risk of injury There is a risk of electric shock with a
faulty residual current protection switch.
–
Before each use of the charger check the residual
current protection switch.
–
Do not use the battery charger if the test procedure
was not successful.
–
Connect the mains plug to the mains connection.
–
1
Press the
button.
The operating display lights up red.
–
2
Press the
button.
The operating display goes out.
The residual current protection switch can be used.
–
Disconnect power plug from mains connection.
20 cm (7.9 in)
−15 ... 50 °C (5 ... 122 °F)
Advertisement
