Advertisement
–
Position turn signal indicator lamp
instrument rack.
F01857-10
–
Join plug-in connector
–
Make sure that the bulb is located in socket
»
If there is no bulb in the socket:
–
Insert the bulb included in the accessory pack in
socket
Indicator lamps (W2.3W / socket W2x4.6d)
–
Position the cable with socket and bulb in turn signal control
bm
lamp
.
F01858-10
–
Install the headlight mask with the headlight.
–
Check the headlight setting.
–
Fold the seat up.
–
Remove 12-V battery
–
Charge the 12-V battery.
F01851-10
–
Remove screws
side.
F01861-10
–
Remove screws
–
Remove screws
–
Lower the license plate holder and hang the tail light to the
side.
Info
Pay attention to the cable of the tail light.
F01877-10
bm
in the combination
bn
of the turn signal cable.
bo
.
(
p. 33)
(
p. 22)
bp
.
(
p. 27)
bq
and hang the battery compartment to the
br
.
bs
.
SETUP 3
bo
.
(
p. 33)
13
Advertisement
