4.3
Deactivating the vehicle
4.4
Mounting the protection cap
Note
Material damage Components damaged or destroyed by water or dirt.
–
Mount the protection cap after you have removed the KTM PowerPack.
–
Push the main switch into the position
A00175-15
–
Turn the ignition key in the ignition lock to the position
while the vehicle is deactivated. Remove the ignition key.
A00169-11
Preparatory work
–
Deactivate the vehicle.
–
Fold the seat up.
–
Remove the KTM PowerPack.
(Option: HV 2 technical personnel)
–
Ascertain that the KTM PowerPack is at zero potential.
(
p. 36)
–
Ascertain that the discharge plug is de-energized.
(
p. 37)
Main work
–
Check the battery discharge plug form ring.
–
Mount protection cap
F01672-10
.
(
p. 19)
(
p. 22)
(
p. 29)
(
1
with one hand.
WORK 4
p. 20)
19