Star Trac Pro S, Pro, Pro Elite Pro STM Treadmill Owner's Manual page 27

You can enter a new upper heart rate limit using the numeric keypad. Use the
upper heart rate limit.
You can use the
increments.
When the desired upper heart rate limit has been entered, press the S
and advance to the next parameter.
6. You are prompted to enter your lower heart rate limit.
The treadmill displays a default lower heart rate limit based on 60% of the maximum heart rate for your age.
You can enter a new lower heart rate limit using the numeric keypad. Use the
heart rate limit.
You can use the
increments.
When the desired lower heart rate limit has been entered, press the S
and advance to the next parameter.
7. You are prompted to enter a maximum speed.
You may enter any speed from 0.5 to 10.0 mph (0.8 to 16.0 kph) for 110-volt units or 0.5 to 12.0 mph (0.8 to 19.3 kph)
for 220-volt units.
You can enter the maximum speed using the numeric keypad. Use the
You can press the
When the desired maximum speed has been entered, press the S
advance to the next workout parameter.
8. You are prompted to select a workout goal.
0 9
Use the
When the desired goal has been selected, press the S
ed with a 3 second countdown, then the treadmill begins the program.
During the Workout
1. During the heart rate controlled workout, the treadmill will respond every 20 seconds to your heart rate. The treadmill
uses your heart rate to adjust the intensity of the workout. The treadmill will adjust speed and (if necessary) incline to
elevate your heart rate to the specified upper limit, then it will gradually decrease incline and (if necessary) speed to
lower your heart rate to the specified lower limit. A typical 20 minute workout may repeat this pattern 3 to 5 times.
2. The program will display various motivational and informative messages throughout the workout. After the workout is
complete, the program will scroll the summary workout information.
3. If, for any reason, the treadmill does not detect your heart rate signal, the treadmill will gradually decrease the workout
intensity. After the heart rate signal is re-acquired the interval training program will resume.
To operate the Manual Program:
During program setup, you can use the B
1. Stand on the running belt; press the
You may enter your weight manually as described below, or you may use the weight scale to enter your weight
ELITE only; see "Using the Weight Scale" for details).
If you do not use the weight scale to enter your weight, the treadmill will display a default weight of 155 pounds (70
kg). You may enter any weight from 0 to 350 pounds (0 to 135 kg).
You can enter your weight using the numeric keypad. Use the
You can press the
increments.
When your correct weight has been entered, press the S
to the next workout parameter.
2. You are prompted to enter a time goal.
The default time goal is 20 minutes. You may enter any time goal from 5 minutes to the maximum allowed program time.
You can enter your time goal using the numeric keypad. Use the
STAR TRAC PRO S / PRO / PRO ELITE TREADMILL O
or key, as necessary, to increase or decrease the displayed upper heart rate limit in 1 BPM
or key, as necessary, to increase or decrease the displayed lower heart rate limit in 1 BPM
or key, as necessary, to increase or decrease the maximum speed in 0.1 unit increments.
keys to select a workout goal: press
key to return to a previously accepted parameter.
ACK
WEIGHT MANAGEMENT
or key, as necessary, to increase or decrease the displayed weight in 1 pound (or 1 kg)
TART
TART
0
or E
TART
1 2
for time goal,
or E key to accept the displayed value. You are prompt-
TART NTER
key, then press the MANUAL key. You are prompted to enter your weight.
0 9
keys to enter your correct weight.
or E key to accept the displayed value and advance
TART NTER
0 9
' M
WNER S ANUAL
0 9
keys to enter the desired
or E key to accept the displayed value
NTER
0 9
keys to enter the desired lower
or E key to accept the displayed value
NTER
9
keys to enter the desired maximum speed.
key to accept the displayed value and
NTER
3
for distance goal or for calories goal.
keys to enter the desired time goal.
(PRO
25