BMW X3 2018 Owner's Manual page 337

Hide thumbs Also See for X3 2018:
Table of Contents

Advertisement

Replacing the rear wiper blade
1.
Lift off the wiper fully and pull off the wiper
blade, arrow.
2.
Attach a new wiper blade. The wiper blade
must engage audibly.
3.
Fold down the wipers.
Lights and bulbs
General information
Lights and bulbs
Lights and bulbs make an essential contribution
to vehicle safety.
Some items of equipment use light-emitting di‐
odes installed behind a cover as a light source.
These light-emitting diodes are related to con‐
ventional lasers and are officially designated as
Class 1 light-emitting diodes.
The manufacturer of the vehicle recommends
that you let a dealer's service center or another
qualified service center or repair shop perform
the work in case of a malfunction.
A spare light box is available from a dealer's serv‐
ice center or another qualified service center or
repair shop.
Follow the safety information, refer to page 337.
Headlight glass
Condensation can form on the inside of the ex‐
ternal lights in cool or humid weather. When driv‐
ing with the lights switched on, the condensation
Replacing components
Online Edition for Part no. 01402989843 - II/18
evaporates after a short time. The headlight
glass does not need to be changed.
If despite driving with the headlights switched on,
increasing humidity forms, for instance water
droplets in the light, have the headlights
checked.
Safety information
WARNING
Bulbs can get hot during operation. Contact
with the bulbs can cause burns. There is a risk
of injury. Only change bulbs after they have
cooled off.
WARNING
Work on switched-on lighting systems can
cause short circuits. There is a risk of injury or
risk of damage to property. When working on
the lighting system, switch off the lights in
question. If necessary, heed the bulb manufac‐
turer's instructions.
WARNING
Intensive brightness can irritate or damage the
retina of the eye. There is a risk of injury. Do not
look directly into the headlights or other light
sources. Do not remove the LED covers.
NOTE
Dirty bulbs have a reduced service life. There is
a risk of damage to property. Do not hold new
bulbs with your bare hands. Use a clean cloth
or something similar, or hold the bulb by its
base.
MOBILITY
337

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents