BMW X3 2018 Owner's Manual page 220

CONTROLS
▷ "Settings": apply settings, for instance to
use the activation points for Panorama View.
Assistance functions
General information
More than one assistance function can be active
at the same time.
The following assistance functions can be man‐
ually activated:
▷ "Parking aid lines".
▷ "Obstacle marking".
▷ "Trailer hitch - zoom".
▷ "Car wash".
The following assistance functions are automati‐
cally displayed:
▷ Side protection, refer to page 221.
▷ Door opening angle, refer to page 221.
Parking aid lines
Pathway lines
Pathway lines help you to estimate the space re‐
quired when parking and maneuvering on level
roads.
Pathway lines depend on the steering angle and
are continuously adjusted to the steering wheel
movements.
220
Driver assistance systems
Online Edition for Part no. 01402989843 - II/18
Turning radius lines
Turning radius lines can only be superimposed
on the camera image together with pathway
lines.
Turning radius lines show the course of the
smallest possible turning radius on a level road.
Only one turning radius line is displayed after the
steering wheel is turned past a certain angle.
Parking using pathway and turning radius
lines
1. Position the vehicle so that the red turning ra‐
dius line leads to within the limits of the park‐
ing space.
2. Turn the steering wheel to the point where
the green pathway line covers the corre‐
sponding turning radius line.
Obstacle marking
Obstacles behind the vehicle are detected by the
PDC Park Distance Control sensors.
Obstacle markings can be shown in the camera
image.