Overview
Depending on the vehicle
equipment: button in the vehicle
Park assistance button
Camera
The camera lens is located in the handle of the
tailgate.
The image quality may be impaired by dirt. If
necessary, clean the camera lens.
Switching on/off
Switching on automatically
The system is switched on automatically if selec‐
tor lever position R is engaged when the engine
is running.
Automatic deactivation during
forward travel
The system switches off when a certain driving
distance or speed is exceeded.
Driver assistance systems
Online Edition for Part no. 01402989843 - II/18
Switch the system back on, if needed.
Depending on the vehicle
equipment: switching on/off
manually
Press park assistance button.
▷
On: the LED lights up.
▷
Off: the LED goes out.
The parking assistance functions are shown on
the Control Display.
Switching the view via iDrive
If the rearview camera view is not displayed,
change the view via iDrive:
1.
Move the Controller to the left, if needed.
2.
"Rear view camera"
The rearview camera image is displayed.
Functional requirements
▷
The rearview camera is switched on.
▷
The tailgate is fully closed.
▷
Keep the recording range of the camera
clear. Protruding cargo or carrier systems and
trailers that are not connected to a trailer
power socket can restrict the visibility range
of the camera.
Assistance functions
General information
More than one assistance function can be active
at the same time.
The assistance functions can be manually acti‐
vated.
▷
"Parking aid lines".
Pathway lines and turning radius lines are dis‐
played, refer to page 216.
▷
"Obstacle marking".
Depending on the vehicle equipment, the ob‐
stacles detected by PDC Park Distance Con‐
CONTROLS
215