BMW X3 2018 Owner's Manual page 265

Closing
Pull out the cargo cover, arrow 1, and hook both
sides into the brackets, arrow 2.
Removing
The cover can be removed to load bulky lug‐
gage.
Press the release button, arrow 1, and pull the
cargo cover out toward the rear, arrow 2.
The cargo cover can be stowed in the storage
compartment under the cargo floor panel.
Installing
Slide the cover forward horizontally into the two
side brackets. Make sure that the cover audibly
engages on both sides.
Cargo area partition net
General information
The cargo area partition net can be installed in
two different positions in the vehicle.
Online Edition for Part no. 01402989843 - II/18
Cargo area
With the rear seat backrest
folded down
1. Fold down the rear seat backrests, refer to
page 262.
2. Open the front lids up on the roof frame until
they engage.
3. Insert each of the two top retaining pins of
the cargo area partition net into the recepta‐
cles until they reach the stop, arrow 1, and
push them forward.
4. Attach the cargo area partition net with the
lower two hooks into the two eyes on the
folded-down rear seat backrest, arrows 2.
You may need to lift the rear seat backrests
slightly in order to do this.
CONTROLS
265