CONTROLS
4.
Insert the removed cover on the back side of
the fragrance cartridge.
5.
Position fragrance cartridge such that the
chip faces away from the cartridge holder.
6.
Insert the fragrance cartridge without pres‐
sure into the cartridge holder. The cartridge
snaps lightly into place.
7.
Push the cartridge holder up, until it engages.
Make sure that no objects press against the
cartridge holder from below, otherwise the
function of the ambient air package could be
impacted.
8.
Close the glove compartment.
246
Climate control
Online Edition for Part no. 01402989843 - II/18
Removing the fragrance cartridge
The fragrance cartridges are located in the glove
compartment.
1.
Open the glove compartment, refer to
page 255.
2.
Press on the bottom of the cartridge holder.
The cartridge holder slides down.
3.
Pull desired fragrance cartridge from the
holder.
Fragrance cartridge, arrow 1: first fragrance
indicated on the Control Display.
Fragrance cartridge, arrow 2: second fra‐
grance indicated on the Control Display.
4.
Pull desired fragrance cartridge from the
holder.