BMW X3 2018 Owner's Manual page 101

Hide thumbs Also See for X3 2018:
Table of Contents

Advertisement

Closing from the raised position
without jam protection
If there is an external danger,
push the switch forward past the
resistance point and hold it.
The glass sunroof closes without jam protection.
Initializing after a power
interruption
General information
After a power failure during the opening or clos‐
ing process, the glass sunroof can only be oper‐
ated to a limited extent.
The system can be initialized under the following
conditions.
The vehicle is parked in a horizontal position.
The drive-ready state is established.
The external temperature is above
41 ℉/5 ℃.
During initialization, the glass sunroof closes
without jam protection.
Make sure that the closing area is clear.
Initializing the system
Press the switch up and hold it
until initialization is complete.
Initialization begins within 15 seconds.
If the glass sunroof is closed, it opens then
closes again.
If the glass sunroof is open, it first closes,
then opens and closes again.
Initialization is complete once the glass sunroof
and sun protection have opened then closed
again.
Opening and closing
Online Edition for Part no. 01402989843 - II/18
CONTROLS
101

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents