BMW X3 2018 Owner's Manual page 280

DRIVING TIPS
Avoid unnecessary acceleration and braking.
By maintaining a suitable distance to the vehicle
driving ahead of you.
Avoid high engine speeds
Driving at low engine speeds lowers fuel con‐
sumption and reduces wear.
If necessary, observe the vehicle's gear shift indi‐
cator, refer to page 147.
Use coasting conditions
When approaching a red light, take your foot off
the accelerator and let the vehicle coast to a halt.
For going downhill take your foot off the acceler‐
ator and let the vehicle roll.
The flow of fuel is interrupted while coasting.
Switch off the engine
during longer stops
Switching off the engine
Switch off the engine during longer stops, for in‐
stance at traffic lights, railroad crossings or in
traffic congestion.
Auto Start/Stop function
The Auto Start/Stop function of the vehicle auto‐
matically switches off the engine during a stop.
If the engine is switched off and then restarted
rather than leaving the engine running con‐
stantly, fuel consumption and emissions are re‐
duced. Savings can begin within a few seconds
of switching off the engine.
In addition, fuel consumption is also determined
by other factors, such as driving style, road con‐
ditions, maintenance or environmental factors.
280
Saving fuel
Online Edition for Part no. 01402989843 - II/18
Switch off any functions
that are not currently
needed
Functions such as seat heating and the rear win‐
dow defroster require a lot of energy and in‐
crease fuel consumption, especially in city and
stop-and-go traffic.
Switch off these functions if they are not needed.
The ECO PRO driving mode supports the en‐
ergy conserving use of comfort features. These
functions are automatically deactivated partially
or completely.
Have maintenance carried
out
Have the vehicle maintained regularly to achieve
optimal vehicle efficiency and service life. BMW
recommends that maintenance work be per‐
formed by a BMW dealer's service center.
For information on the BMW Maintenance Sys‐
tem, refer to page 334.
ECO PRO
Concept
ECO PRO supports a driving style that saves on
fuel consumption. For this purpose, the engine
control and comfort features, for instance the cli‐
mate control output, are adjusted.
Steptronic transmission: under certain conditions
the engine is automatically decoupled from the
transmission in the D selector lever position. The
vehicle continues traveling with the engine idling
to reduce fuel consumption. The D selector lever
position remains engaged.
In addition, context-sensitive information, ECO
PRO tips, are displayed to assist with an opti‐
mized fuel consumption driving style.