BMW X3 2018 Owner's Manual page 126

CONTROLS
There is a risk of accidents or injuries. Do not
leave children or animals unattended in the ve‐
hicle. Take the remote control with you when
exiting and lock the vehicle.
NOTE
If the vehicle is stationary, Automatic Hold en‐
gages the parking brake and prevents the vehi‐
cle from rolling in a vehicle wash. There is a risk
of damage to property. Deactivate Automatic
Hold prior to entering the vehicle wash.
Overview
Automatic Hold
Establishing function readiness of
Automatic Hold
1. Switch on drive-ready state.
2. Press button.
The LED lights up.
The indicator light lights up green.
Automatic Hold is functional.
After every new vehicle start, the last se‐
lected setting is active.
Automatic Hold holding the vehicle
Function readiness is established and the driv‐
er's door is closed.
126
Driving
Online Edition for Part no. 01402989843 - II/18
After stepping on the brake pedal, for instance
when stopping at a traffic light, the vehicle is au‐
tomatically secured against rolling.
The indicator light lights up green.
Driving away
Step on the accelerator pedal to drive off.
The brake is released automatically and the indi‐
cator light is no longer illuminated.
Activating the parking brake
automatically
The parking brake is automatically set if drive-
ready state is switched off while the vehicle is
being held by Automatic Hold or if the vehicle is
exited.
The indicator light changes from green
to red.
The parking brake is not set automatically, if the
drive-ready state is switched off, while the vehi‐
cle is coasting to a halt. Automatic Hold is deacti‐
vated.
Switching function readiness off
Press button.
The LED goes out.
The indicator light goes out.
Automatic Hold is switched off.
If the vehicle is being held by Automatic Hold,
press additionally on the brake pedal, when
switching off.
Malfunction
In the event of a failure or malfunction of the
parking brake: