Boot Commands - ZyXEL Communications Prestige 310 User Manual

Prestige 310 Broadband Internet Access Router
7.9

Boot commands

In Debug mode enter ATHE to view Prestige boot module commands as shown below and then
enter ATGO to continue booting the system. For ATBAx, x denotes the number preceding the
colon to give the baud rate following the colon in the list of numbers that follows; e.g., ATBA3
will give a baud of 9.6 Kbps. ATSE displays the seed that is used to generate a password to turn
on the debug flag in the firmware. The ATSH command shows product related information such
======= Debug Command Listing =======
AT
ATHE
ATBAx
ATENx,(y)
ATSE
ATTI(h,m,s)
ATDA(y,m,d)
ATDS
ATDT
ATDUx,y
ATRBx
ATRWx
ATRLx
ATGO(x)
as boot module version, vendor name, product model, RAS code revision, etc.
7-16
just answer OK
print help
change baudrate.1:38.4k, 2:19.2k, 3:9.6k 4:57.6k 5:115.2k
set BootExtension Debug Flag (y=password)
show the seed of password generator
change system time to hour:min:sec or show current time
change system date to year/month/day or show current date
dump RAS stack
dump Boot Module Common Area
dump memory contents from address x for length y
display the 8-bit value of address x
display the 16-bit value of address x
display the 32-bit value of address x
run program at addr x or boot router
Figure 7-15 Boot module commands
System Maintenance