19: System - Roland V-8HD Reference Manual

19: SYSTEM

Menu item Value
HDCP OFF, ON
60, 59.94, 50, 30, 29.97, 25,
FRAME RATE
24, 23.976Hz
1080p, 1080i, 720p
SYSTEM FORMAT
Specifies the function of the [CUT] button.
H AUTO TAKE
H AUTO TAKE I
H CUT
CUT SW ASSIGN
H CUT I
H TRANSFORM
Specifies the function of the [AUTO] button.
AUTO TAKE I
H AUTO TAKE I
CUT I
AUTO SW ASSIGN
H CUT I
TRANSFORM I
PANEL OPERATION A/B, PGM/PST
EFFECTS TRANSITION
OFF, ON
SYNC
ENTER
Enable (ON) or disable (OFF) the panel lock.
Menu item
ALL SW & VOLUME
A/PGM 1–8 SW
B/PST 1–8 SW
CUT SW
AUTO SW
MODE SW
AUX SW
PinP 1 SOURCE SW
PinP 2 SOURCE SW
PANEL LOCK
MEMORY SW
MACRO SW
TRANSITION SW
VIDEO FADER
SPLIT/VFX A BLOCK
SPLIT/VFX B BLOCK
PinP 1 BLOCK
PinP 2 BLOCK
DSK BLOCK
USER 1 SW
USER 2 SW
CAPTURE IMAGE SW
OUTPUT FADE
Explanation
(Bold: default)
Specifies whether HDCP is enabled (ON) or disabled (OFF).
When set to "ON, " copyright-protected (HDCP) video can be input.
HDCP is also added to the video that is output.
* When you change the setting, the change is not applied until you press the [VALUE]
knob to confirm.
Specifies the frame rate.
* A change in this setting does not take effect until you press the [VALUE] knob to
confirm, and then restart the unit.
Specifies the system format for the V-8HD.
* When you change the setting, the change is not applied until you press the [VALUE]
knob to confirm.
When the video of the B/PST bus is selected, switches to the video of the A/PGM bus.
Switches the video between A/PGM bus and B/PST bus.
When the video of the B/PST bus is selected, switches to the video of the A/PGM bus as a
cut.
Switches the video between A/PGM bus and B/PST bus as a cut.
Switches to the video of the A/PGM bus as a cut only while you're holding down the
button.
When the video of the A/PGM bus is selected, switches to the video of the B/PST bus.
Switches the video between A/PGM bus and B/PST.
When the video of the A/PGM bus is selected, switches to the video of the B/PST bus as a
cut.
Switches the video between A/PGM bus and B/PST as a cut.
Switches to the video of the B/PST bus as a cut only while you're holding down the
button.
Specifies the operation mode for video transitions.
Sets whether the PinP/DSK composites are switched on and off in tandem with the video
transitions.
When this is "ON, " the PinP/DSK composition turn on/off in tandem with the video
transitions. The composited result that is previewed is sent to final output when
transitioning to a different video.
Displays the following PANEL LOCK menu.
Value
(Bold: default)
OFF, ON
OFF, ON
OFF, ON
OFF, ON
OFF, ON
OFF, ON
OFF, ON
OFF, ON
OFF, ON
OFF, ON
OFF, ON
OFF, ON
OFF, ON
OFF, ON
OFF, ON
OFF, ON
OFF, ON
OFF, ON
OFF, ON
OFF, ON
OFF, ON
OFF, ON
Explanation
Turns on/off the settings of the following buttons and knobs in a single action.
Cross-point A [1]–[8] buttons
Cross-point B [1]–[8] buttons
[CUT] button
[AUTO] button
[MODE] button
AUX [1]–[8] buttons
PinP 1 [1]–[8] buttons
PinP 2 [1]–[8] buttons
MEMORY [1]–[8] buttons
AUX / PinP SOURCE / MEMORY [1]–[8] buttons
[TRANSITION] button
Video fader
SPLIT/VFX [A] knob/button
SPLIT/VFX [B] knob/button
PinP 1's [POSITION H] knob, [POSITION V] knob, [PVW] button, [ON] button
PinP 2's [POSITION H] knob, [POSITION V] knob, [PVW] button, [ON] button
DSK's [LEVEL] knob, [GAIN] knob, [PVW] button, [ON] button
USER [1] button
USER [2] button
[CAPTURE IMAGE] button
[OUTPUT FADE] knob
Menu List
85