Operating Instructions; General Instructions About Operation; Type Plate - Spartherm XS 500 Installation And Operating Instructions Manual

5. OPERATING INSTRUCTIONS

Read these installation and operating instructions through carefully before
installing or commissioning your fireplace cassette. All objects must be
removed from the firebox (except the firebox lining).
Ask your specialist dealer to provide you with instruction in the operation
and functionality of your fireplace cassette. National and European stand-
ards, as well as local regulations, are to be observed in the operation of
fireplaces!

5.1 GENERAL INSTRUCTIONS ABOUT OPERATION

• Small children, old or frail people: As with all heating appliances, it is a
good idea to install safety devices for these groups of people because
the glass panel and also the outer casing of the fireplace cassette can
become very hot! Risk of burning! Never allow these groups of people
to touch or use a fireplace cassette without supervision when a fire is
lit or has just been extinguished. Please make these groups of people
aware of the safety hazards.
• Thermal energy is set free as a result of the burning process that will
lead to intense heating of the fireplace components such as the sur-
faces, door, door and operating handles, glass, flue pipes etc. Please
refrain from touching or operating the fireplace cassette without cor-
responding protection (e.g. heat-resistant gloves).
• Operation with door left open: Operation with the door open can cause
excess smoke. The appliance must not be operated with the appliance
door left open except as directed in the instructions.
• The fireplace cassette may only be operated when the firebox door is
closed. The door must also be kept closed at all times even in a cold
condition. The door is only opened to light the fire and to add wood!
• The fireplace may not be modified! In particular, no components may be
placed in the firebox or the exhaust gas flue or combustion air system if
these parts have not been expressly approved by the company
• Extractor fan hoods, ventilation systems etc. that are installed together
with fireplaces in the same room or group of rooms can have a nega-
tive influence on the functionality of the fireplace cassette (through to
smoke leakage into the living area) and may under no circumstances
be operated at the same time as the fireplace cassette without suitable
measures having being taken.
• It must be ensured that there is sufficient combustion air when multiple
fireplaces are operated in one room or connected rooms!
• This fireplace cassette is designed for temporary burning of wood. Per-
manent operation can also not be achieved due to the extraction of
combustion air and is not permitted!
5.2 T YPE PLATE
The type plate is located on the right hand side of your fireplace cassette
on the convection air jacket. It contains technical data and information. The
type plate may not be removed because this confirms that the appliance has
been tested. It is required for the approval and the yearly inspection carried
out by the heating inspector/chimney sweep.

Type plate

GB 23
GB