Requirement Of Effectiveness For The Warranty; Warranty Exclusions; Defect Remediation/Repairs; Extension Of Warranty - Spartherm XS 500 Installation And Operating Instructions Manual

8.4 REQUIREMENT OF EFFECTIVENESS FOR THE
WARRANT Y
The warranty period starts on the date of delivery to the dealer/intermediary.
This must be verified from a document such as an invoice with the dealer/
intermediary's confirmation of delivery. The warranty certificate relating to
the product must be produced by the claimant when making a warranty
claim.
If such proof is not produced Spartherm Feuerungstechnik GmbH shall not
be obliged to honour the warranty.
8.5 WARRANT Y EXCLUSIONS
The warranty does not cover:
• Wear and tear to the product
• Fireclay bricks vermiculite: These are natural products subjected to
expansion and contraction during the heating process. This may create
cracks. For as long as the linings remain in position in the fire chamber
and do not break up, they remain fully functional.
• the surfaces: Discoloration of the enammelenamel or galvanized sur-
faces caused by thermal stress or overload.
• the elevating mechanism: If the installation instructions are not correctly
followed, resulting in overheating of the pulleys and bearings.
• the seals: Reduced sealing due to thermal stress and hardening.
• the glass ceramics: Soiling caused by soot or burnt-in residues of burnt
materials as well as visibly changed colour or other aspects due to ther-
mal stress.
• Improper transport and/or incorrect storage
• Improper handling of fragile components such as glass and ceramics
• Improper handling and/or use
• Lack of maintenance
• Incorrect installation or connection of the unit
• Non-observance of the installation and operating instructions
• Technical modifications to the unit by third parties

8.6 DEFECT REMEDIATION/REPAIRS

Notwithstanding the statutory guarantee, which shall take precedence over
our warranty during the statutory guarantee periods, within the scope of
our warranty we will remedy free of charge all defects demonstrably due
to a material fault or manufacturing error, provided that the other terms
and conditions of this warranty undertaking are observed. In accordance
with this warranty undertaking Spartherm Feuerungstechnik GmbH reserves
the right either to rectify the defect or to replace the unit free of charge.
Remediation of defects shall take precedence.
This warranty undertaking expressly does not cover further compensation
exceeding the statutory guarantee.
8.7 EXTENSION OF WARRANT Y
In the case of performance in accordance with the terms of the warranty,
whether remediation of defects or replacement of a unit, the warranty period
shall be extended in respect of the replacement unit/components.

8.8 SPARE PARTS

No spare parts other than those produced or recommended by the manu-
facturer shall be used.
GB 32