Toshiba 5000 Series Installation And Operation Manual page 24

MATERIAL - VINYL OR POLYESTER
TEMPERATURE - MINUS 20 TO 100 deg. C
ADHESIVE - L-344 OR EQUIV.
C – 43784
MUST RESIST OIL SOLVENTS
ALL MATERIALS USED MUST
1.50
BE UL RECOGNIZED
DANGER AREA BACKGROUND COLOR: ANSI DANGER RED
DANGER AREA TEXT COLOR: ANSI WHITE
TEXT AREA BACKGROUND COLOR: ANSI WHITE
TEXT AREA TEXT COLOR: ANSI BLACK
CORNER RADIUS: VENDOR STANDARD
0.00
D – 40761
E – 90468
DRAWN: CHECKED:
VB 3-10-94
WLM 11-13
THIS MATERIAL IS THE EXCLUSIVE PROPERTY OF TOSHIBA INTERNATIONAL
CORPORATION AND SHALL NOT BE REPRODUCED, USED, OR DISCLOSED
TO OTHERS UNLESS PRIOR WRITTEN AUTHORIZATION IS OBTAINED.
10-13 JE
DATE BY
13131 WEST LITTLE YORK ROAD, HOUSTON, TX 77041 U.S.A.
DRAWN: CHECKED:
RCM 4-11-96 WLM 01-14
THIS MATERIAL IS THE EXCLUSIVE PROPERTY OF TOSHIBA INTERNATIONAL
CORPORATION AND SHALL NOT BE REPRODUCED, USED, OR DISCLOSED
TO OTHERS UNLESS PRIOR WRITTEN AUTHORIZATION IS OBTAINED.
13131 WEST LITTLE YORK ROAD, HOUSTON, TX 77041 U.S.A.
CHECKED: APPROVED:
ZIR 11-21-14 WLM 11-14
14
CORNER RADIUS: VENDOR STANDARD
DANGER
DC VOLTAGE
DC Voltage supplied by batteries is still
present after equipment has been
turned off and taken off line.
Accidental contact with live parts can
cause personal injury and death.
Disconnect all DC Sources before
performing any service or testing
in this compartment.
2.50"
D A N G E R
Battery fuse is always live.
Risk of electrical shock.
Check fuse voltage and disconnect
batteries before changing fuse.
2.50"
D A N G E R
UPS INVERTER MUST BE PLACED
IN STATIC BYPASS PRIOR TO MBS
BREAKER OPERATION.
FAILURE TO FOLLOW THE PROPER
OPERATING INSTRUCTION COULD
RESULT IN EQUIPMENT DAMAGE,
SEVERE INJURY, OR DEATH.
TITLE:
APPROVED:
DANGER LABEL
WLM 11-13
PN 90468
PLP
FIGURE 5.2: WARNING LABELS (CONT.)
TITLE:
APPROVED:
WLM 01-14
ECN DATE
ECN
TITLE:
DANGER MBS
INVERTER LABEL
5000 Series 3P1 Industrial UPS Installation and Operation Manual – 92973-001
MATERIAL - VINYL OR POLYESTER
TEMPERATURE - MINUS 20 TO 100 deg. C
ADHESIVE - L-344 OR EQUIV.
C1 – 90632
MUST RESIST OIL SOLVENTS
ALL MATERIALS USED MUST
1.625
BE UL RECOGNIZED
DANGER AREA BACKGROUND COLOR: ANSI DANGER RED
WARNING AREA
DANGER AREA TEXT COLOR: ANSI WHITE
MATERIAL - VINYL OR POLYESTER
TEXT AREA BACKGROUND COLOR: ANSI WHITE
TEXT AREA
TEMPERATURE - MINUS 20 TO 100 deg. C
TEXT AREA TEXT COLOR: ANSI BLACK
ADHESIVE - L-344 OR EQUIV.
CORNER RADIUS: VENDOR STANDARD
MUST RESIST OIL SOLVENTS
ALL MATERIALS USED MUST
BE UL RECOGNIZED
CAUTION AREA BACKGROUND COLOR: ANSI CAUTION YELLOW
CAUTION AREA TEXT COLOR: ANSI BLACK
43784
TEXT AREA BACKGROUND COLOR: ANSI WHITE
TEXT AREA TEXT COLOR: ANSI BLACK
0.00
CORNER RADIUS: VENDOR STANDARD
D1 – 90635
DANGER
AREA
TEXT AREA
PN 40761
G – 94046
CAUTION
AREA
TEXT AREA
SCALE:
DRAWN:
2=1 JEE 10-14-13
THIS MATERIAL IS THE EXCLUSIVE PROPERTY OF TOSHIBA INTERNATIONAL
1
REV:
CORPORATION AND SHALL NOT BE REPRODUCED, USED, OR DISCLOSED
TO OTHERS UNLESS PRIOR WRITTEN AUTHORIZATION IS OBTAINED.
DRAWING NO.:
40761
ECN DATE BY
13131 WEST LITTLE YORK ROAD, HOUSTON, TX 77041 U.S.A.
DRAWN: CHECKED:
DANGER LABEL
JEE 10-14-13
DC VOLTAGE
THIS MATERIAL IS THE EXCLUSIVE PROPERTY OF TOSHIBA INTERNATIONAL
CORPORATION AND SHALL NOT BE REPRODUCED, USED, OR DISCLOSED
TO OTHERS UNLESS PRIOR WRITTEN AUTHORIZATION IS OBTAINED.
DRAWING NO.:
DRAWN:
BY CHECKED:
13131 WEST LITTLE YORK ROAD, HOUSTON, TX 77041 U.S.A.
WLM 6-15
THIS MATERIAL IS THE EXCLUSIVE PROPERTY OF TOSHIBA INTERNATIONAL
CORPORATION AND SHALL NOT BE REPRODUCED, USED, OR DISCLOSED
TO OTHERS UNLESS PRIOR WRITTEN AUTHORIZATION IS OBTAINED.
DATE BY
13131 WEST LITTLE YORK ROAD, HOUSTON, TX 77041 U.S.A.
DRAWING NO.:
90468
DANGER
TENSION DC
Tension DC fournie par des batteries
est encore présente après que le
matériel a été éteint et mis hors linge.
Tout contact accidentel avec des
composants sous tension peut causer
des blessures et la mort.
Débrancher toutes les sources DC
avant d´effectuer des réparations ou
des tests dans ce compartiment.
2.50"
D A N G E R
Risque de choc électrique.
Le fusible de la batterie est toujours sous
tension.
Vérifier la tension du fusible et débrancher
les batteries avant de changer le fusible.
3.75"
C A U T I O N
Maintenance bypass procedure to be
followed, prior to shut down of power.
Damage to equipment and dropped
load will occur if correct process is
not followed prior to use. See manual
TITLE:
CHECKED: APPROVED:
WLM 11-13 WLM 11-13
for process.
SCALE:
APPROVED:
WLM 11-13 WLM 11-13
FULL
1
REV:
43784
TITLE:
APPROVED:
CAUTION LABEL
UPS DROP LOAD
SCALE:
1=1
0
REV:
90632
PN 90635
SCALE:
DANGER LABEL
2=1
PN 94046
PLP-FRENCH
0
REV:
DRAWING NO.:
90635
TITLE:
DANGER L
DC VOLTAGE-FR
SCALE:
1=1
0
REV:
DRAWING NO.:
94046
WARNIN
TEXT AR
DRAWI