Save User Multis - Kurzweil Flash Play PC4 Musician's Manual

Multi Mode

Save User Multis

Save User Multis
Press the Save button to view the Save Dialog, which allows you to save a Split or Layer
Multi as a User Multi, or to save a Multi with its current Zone Mute button status. To save
the changed state of Multi controllers which have other assignements, you must set an entry
value for each controller on the Multi Edit Mode Controls Page. See CONTROLS Page on
page 7-13 for details.
The Save Dialog allows you to choose an ID number to that will be associated with the
Multi you are saving. When viewing the Save Dialog, you can quickly save the Multi to the
displayed ID number by pressing the Save button again.
Changing ID Numbers
The display shows the first available ID number and the current Multi name. User Multis can
be saved to ID numbers from 4096 to 8191.
If you are saving a Multi that has not been previously edited, the next available unused ID
number will be selected.
If you are saving a previously edited User Multi, the ID number that the Multi was last saved
with will be selected.
Press the Previous and Next buttons simultaneously to toggle between selecting the ID
number that the Multi was last saved with and the next available unused ID number.
To change the ID number, turn the Alpha Wheel or use the Previous/Next buttons to select
the new ID number. The label underneath indicates if it is an "Unused ID". You can also use
the keypad function of the Category buttons to type an ID number, followed by pressing the
Enter button
6-9