Depthctl; Maxdpth; Keymap Level Parameters - Kurzweil Flash Play PC4 Musician's Manual

Program Edit Mode
FM Alt Input Page
Depth
Use the Depth parameter to set the maximum modulation depth of Source 1.
When the Source 1 control source is at its minimum value, Source 1 will have no effect on
the Alt Input source layer output level.
When the Source 1 control source is at its maximum value, Source 1 will apply the amount
of modulation set by the Depth parameter.
Source 1 control source values between the minimum and maximum will scale the amount
of modulation between no effect and the amount set by the Depth parameter.
Source 2
Use the Source 2 parameter to modulate the Alt Input source layer output level with a
physical controller or other control source.

DepthCtl

Use the DepthCtl parameter to modulate the Source 2 modulation depth with a physical
controller or other control source.
When a DepthCtl control source is at its minimum value, the Source 2 modulation depth
will be set to the value of the MinDpth parameter.
When a DepthCtl control source is at its maximum value, the Source 2 modulation depth
will be set to the value of the MaxDpth parameter.
DepthCtl control source values between the minimum and maximum will scale the Source 2
modulation depth between the values of the MinDpth and MaxDpth parameters.
MinDpth
Use the MinDpth parameter to set the minimum modulation depth of Source 2.
When a DepthCtl control source is at its minimum value, Source 2 will apply the amount of
modulation set by the MinDpth parameter.

MaxDpth

Use the MaxDpth parameter to set the maximum modulation depth of Source 2.
When a DepthCtl control source is at its maximum value, Source 2 will apply the amount of
modulation set by the MaxDpth parameter.

Keymap Level Parameters

Adjust
Use the Adjust parameter to set the output level of the Keymap.
3-101