Zone Name - Kurzweil Flash Play PC4 Musician's Manual

Multi Edit Mode
MAIN Page
external MIDI controller, and not from the PC4 keyboard. You can also choose "Any L+M"
or "Any M" for the Input Channel setting. "Any L+M" and "Any M" will make the zone
receive MIDI on any channel that an external device is transmitting. This is useful if you are
using a single external MIDI controller and are not sure which channel it is transmitting on.

Zone Name

Use the Zone Name parameter to give the Zone a name that can be viewed when Multi
Mode is set to show Zone Info. By default the Zone's Program name is used as the Zone
name.
To edit the Zone name, select the Zone Name field and press the EDIT button to enter the
Zone Name editor. Use the Navigation buttons and soft buttons to change the Zone name.
Press OK to save the new Zone name, or CANCEL to return to the previous page.
For details on showing Zone Info in Multi Mode, see
7-12
"Show Zone Info" on page 9-6.