Kurzweil Flash Play PC4 Musician's Manual page 229

Controller Controller
Number Destination
157 Latch
158 Latch2:
160 SusLatch
161 Panic
162 SoloZn
163 Riff OnOff
165 Riff Duration
166 Riff Velocity
167 Riff Delay
168 TapTempo
170 -Arp Shift
171 ShiftPatt
172 ShiftPBank
173 VelPatt
174 VelPBank
175 VelFixed
176 ShKeyNum
177 ShiftKey
178 ShKeyNuV
180 Chan Intonation
181 Chan Int Key
To control the Arpeggiator Latch switch, 0-63 = off, 64-127 = on. (See
3-23)
To control the Arpeggiator Latch2 switch, 0-63 = off, 64-127 = on.
For Arpeggiator Latch Pedals mode, 0-63 = off, 64-127 = on.
Sends an "all notes off" message and an "reset all controllers" message on all 16
MIDI channels.
Solo Zone - Values above 64 will solo the zone that sends values to this destina-
tion, values below or equal to 64 will unsolo the zone. When soloing a Zone, all oth-
er Zones will become muted, and unmuting a muted Zone will make that Zone the
soloed zone. If the currently soloed Zone has a controller assigned to Destination
149 (Mute Zone), solo mode can be canceled by sending a value to this destination.
If Riff is set to On on the RIFF page, values 64-127 will trigger the riff, values 0-63
will release the riff.
Controls the Riff Duration parameter. The Duration value is calculated by multiplying
the received controller value by 1000, and dividing the answer by 128 (any decimal
points are taken off the final value.) Here are some example values: 7 = 54%, 13 =
101%,19 = 148%, 32 = 250%, 64 = 500%, 127 = 992%
Controls the Riff Velocity parameter. The Velocity value is calculated by multiply-
ing the received controller value by 2. For Example, 25 = 50%, 50 = 100%, 100 =
200%, 127 = 254%.
Controls the Riff Offset parameter. Controller value 64 = 0 offset ticks. Each value
away from 64 = 512 offset ticks. For example, 63 = -512 offset ticks, 65 = +512
offset ticks, 0 = -32768 offset ticks, 127 = +32256 offset ticks.
Assign this to a switch (set to Type: Toggled) to control the tap tempo function, then
tap the switch in time to set the Multi tempo.
Sets ARPEGGIATOR values for Shift to negative. 0-63 = off, 64-127 = on. (See
Shift Amount on page 3-26)
Selects one of the 128 patterns in the current ARPEGGIATOR Shift Pattern Bank.
(See
Shift Pattern on page 3-26)
A controller value selects the corresponding Shift Pattern Bank for the
ARPEGGIATOR page of a controller's zone. For example, controller value 2 selects
Shift Pattern bank 2, controller value 7 selects Shift Pattern bank 7.
Selects one of the 128 patterns in the current ARPEGGIATOR VelPatt Bank. (See
Velocity Patt on page 3-30)
A controller value selects the corresponding Velocity Patt Bank for the
ARPEGGIATOR page of a controller's zone. For example, controller value 2 selects
Velocity Patt bank 2, controller value 7 selects Velocity Patt bank 7.
Set's arpeggiator velocity when ARPEGGIATOR Velocity Mode is set to Fixed. (See
Velocity on page 3-28)
Shift Key Number (see below)
Shift Key (see below)
Same as 176 ShKeyNum, but the Shift Pattern's velocity will be modified by the
current velocity pattern of the zone.
Selects the Intonation Map (IDs 0-127) in a MIDI channel in real time. On the Multi
Edit CONTROLS page, when setting a switch controller to this Destination the
name of the selected Intonation Map will be displayed. For example: 18 (EastMed).
Selects the Intonation Key (C through B) in a MIDI channel in real time. On the
Multi Edit CONTROLS page, when setting a switch controller to this Destination the
MIDI number and note name of the selected Intonation Key will be displayed. For
example: 41 (D#).
Multi Edit Mode
CONTROLS Page
Description
Latch on page
7-23