Kurzweil Flash Play PC4 Musician's Manual page 284

Song Mode
The TRACK Page
When the Change function is applied with Mode set to PosRamp, the selected velocity or
controller values will gradually change over the region of time, defined by the locations set
for the From and To parameters, from the original value to the new value determined by the
Scale and Offset settings. The first events being modified within the region will have little or
no change from their original values. The amount of Scale and Offset applied will increase as
the song approaches the Bar and Beat defined in the To parameter, where the full amount of
Scale and Offset will be applied.
You can set Mode to NegRamp to achieve the opposite dynamic effect of PosRamp.
NegRamp works in the same way, but the amount of Scale and Offset applied will decrease
from the full amount to little or no change as the song approaches the bar, beat, and tick
defined in the To parameter.
Remap
Use the Remap function to apply values from existing controller events to another controller
number.
Old: Controller List (0 to 120)
Use the "Old" parameter to select the Controller that you wish to remap. This Controller
must already have events on the current track in order to apply it to the "New" Controller
type. The old events will be deleted.
New: Controller List (0 to 120)
Use the "New" parameter to select the Controller that will use the existing values from the
"Old" Controller.
8-35