Uploading Html Files - Extron electronics DMS 1600 User Manual

Uploading HTML Files

You can create customized HTML pages for the switcher to display. The HTML Files List
window (see figure 37), accessible via the Tools menu, provides a way to view the contents
of the file system and upload custom HTML pages to the switcher.
NOTE:
4
Figure 37.
NOTE:
Upload HTML pages as follows:
NOTE:
1.
Connect the PC to the matrix switcher via the RS-232/RS-422 port, USB port, or
Ethernet port on the switcher.
2.
Start the Matrix Switchers Control Program and connect to the DMS matrix switcher (see
"Starting the
3. Click on
4.
Click the
appears.
5.
Navigate to the folder where you saved the HTML file. Select the file.
NOTES: • To select multiple files, hold the Ctrl key while you select the desired files.
6. Click the
minutes.
7.
Click the
8. Click the
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The HTML Files List window is for inserting your own HTML pages. This is not
the window to replace the firmware that controls all switcher operation (see
Firmware" in this chapter to replace the firmware).
"Updating
HTML Files List Window
The files listed in figure 37 are shown for example only and may not be present
on your switcher.
The following characters are invalid or not recommended in file names:
{space} + ~ , @ = ' [ ] { } < > ' " ; : | \ and ?.
program," steps 1 through 4, starting on page 65).
>
Tools HTML File Manager
Pick File(s) to Load to Server
• If you want one of the HTML files that you created to be the default
start-up page, name the file "index.html." The DMS matrix switcher
automatically looks for that file name when you first connect to it using
an Internet browser.
button. The upload of files to the DMS matrix switcher may take a few
Open
Update button to confirm the upload.
button to exit the HTML Files List window.
Close
7 8
.
button. An
Open File
DMS 1600 and DMS 3600 • Matrix Software
window
77