Reference Information; Specifications - Extron electronics DMS 1600 User Manual

Reference
Information
This section discusses the specifications, part numbers, and accessories for the
DMS 1600 and DMS 3600. Topics that are covered, include:
•
•

Specifications

Video — DMS DVI boards
Routing
1600 Series .............................. From 4 x 4 to 16 x 16 matrix, expandable by increments of 4 inputs and 4 outputs
3600 Series .............................. From 4 x 4 to 36 x 36 matrix, expandable by increments of 4 inputs and 4 outputs
Gain ............................................... Unity
Resolution range ............................ Up to 1080p (HDTV) or 1920x1200 (the highest resolution of the single link DVI standard)
Signal type ..................................... Single-link DVI digital video signals are supported.
Digital video ............................ RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI),
NOTE:
The DMS DVI Series boards are not compatible with HDMI 1.3.
Digital audio ............................ Not supported
Consumer Electronics Control (CEC)
EDID and DDC ......................... Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data
HDCP ...................................... Not supported
HPD ......................................... Supports hot plug detection (HPD) of display as a pass-through signal.
Maximum data rate ........................ 4.95 Gbps (1.65 Gbps per color)
Maximum pixel clock ...................... 165 MHz
Standards ....................................... DVI 1.0
Switching speed ............................. 200 ns, max.
Video input — DMS 44 DVI and DMS 4i DVI input boards
Number/signal type ........................ 4 digital RGB single link DVI-D per input board
Connectors .................................... 4 female DVI-I (digital only) per input board
Equalization ................................... Automatic
Input cable length .......................... 100' (30 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p; 8 bit color
NOTE:
The transmission distance varies depending on the signal resolution and on the type of cable, graphics card,
and display used in the system.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Specifications
Part Numbers
@ 48, 50, or 60 Hz
actively buffered (supports all single link DVI and HDMI [if using an optional adapter]
standards from 640x480 @ 60 Hz to 1600x1200 @ 60 Hz computer video)
Not supported
using DVI and HDMI standards. EDID and DDC signals are actively buffered.
DMS 1600 and DMS 3600 • Reference Information 118