Extron electronics DMS 1600 User Manual page 77

Administrator Password and User Password fields
The
Administrator Password
switcher via the Ethernet port with all of the administrator rights and privileges. The
Password field displays the password required to log on to the matrix switcher via the
Ethernet port as a user, without all of the administrator rights and privileges. Passwords are
case sensitive and are limited to 12 upper-case and lower-case alphanumeric characters.
While you are logged on as a user, both password fields are masked with asterisks
(************) as a security measure.
NOTES:
• Editing the
Ethernet port can immediately disconnect the user from the switcher. Extron
recommends editing this field using either the serial port or USB port and
protecting the Ethernet access to this screen by assigning an administrator
password to qualified and knowledgeable personnel only.
•
An administrator password must be created before a user password can be
created.
•
The following characters are invalid or not recommended in passwords:
{space} + ~ , @ = ' [ ] { } < > ' " ; : | \ and ?.
Edit either password field as follows:
1.
Click in the desired
2. Edit the case-sensitive password as desired.
3.
Press <Tab> on the keyboard or click in another field to exit the
4.
Click the Take
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
field displays the password required to log on to the matrix
Administrator Password
field. The pointer tool becomes a text cursor.
Password
button to make the password change take effect.
DMS 1600 and DMS 3600 • Matrix Software
field while connected via the
field.
Password
User
71