Uploading Html Files - Extron electronics HDXP Plus Series User Manual

Uploading HTML Files

You can create customized HTML pages for the HDXP to display. The HTML Files List
window (shown below) provides a way to view the contents of the HDXP file system and
to upload custom HTML pages to the switcher.
Figure 82.
Upload HTML pages as follows:
NOTES:
• The files listed in figure 82 are shown for example only and may not be present on
your switcher.
• The HTML Files List window is for inserting your own HTML pages. This is not
the window to replace the firmware that controls all switcher operation (see
Updating the Firmware
•
The following characters are invalid in file names:
+ ~ , @ = ` [] {} < > ' " ; : | \ ?
1. Connect the PC to the HDXP via the RS232/RS422 port or Ethernet port.
2. Start the Matrix Switcher Control Program and connect to the HDXP switcher (see
steps 1 through 4 under
3. From the
opens.
4. Click the
5. Navigate to the folder where you saved the HTML files. Select the files.
NOTES:
•
•
6. Click the
7.
Click the
8. Click the
HTML Files List Window
on page 81 to replace the firmware).
Using the Software
menu, select
Tools HTML File Manager
Pick Files to Load to Server
To select multiple files, hold the <Ctrl> key while you click on the desired files.
If you want one of the HTML files that you created to be the default start-up
page, name the file "index.html". The HDXP switcher looks for that file name
when you first connect to it using an Internet browser.
button. The file uploading process may take a few minutes.
Open
button to confirm the upload.
Update
button to exit the HTML Files List window.
Close
HDXP Plus Series Switchers • Matrix Software
and {space}.
on page 70 for the procedure).
. The HTML Files List window
button. The Select files window opens.
83