Default Settings For Manual Mode - Siemens SINUMERIK 840D sl Turning Operating Manual

Working in manual mode

5.8 Default settings for manual mode

5.8 Default settings for manual mode
Specify the configurations for the manual mode in the "Settings for manual operation" window.
Default settings
Settings
Type of feedrate
Setup feedrate G94
Setup feedrate G95
Variable increment
Spindle speed
Procedure
See also
Switching the unit of measurement (Page 101)
152
Meaning
Here, you select the type of feedrate.
● G94: Axis feedrate/linear feedrate
● G95: Revolutional feedrate
Enter the desired feedrate in mm/min.
Enter the desired feedrate in mm/rev.
For variable increments, enter the desired increment when traversing axes.
Here, enter the desired spindle speed in rpm.
1. Select the "Machine" operating area.
2. Press the <JOG> key.
3. Press the menu forward key and the "Settings" softkey.
The "Settings for manual operation" window is opened.
Operating Manual, 06/2019, A5E44903486B AB
Turning