Siemens SINUMERIK 840D sl Turning Operating Manual page 833
Hide thumbs
Also See for SINUMERIK 840D sl Turning:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
V24 setting
Wait for XON for start re‐
ceive V24
End of data transfer (hex)
Time monitoring (sec)
Procedure
Turning
Operating Manual, 06/2019, A5E44903486B AB
Meaning
Only with protocol: Xon/Xoff
Only for punched tape format
Stop with end of data transfer character
The default setting for the end of data transfer character is (HEX) 1A
Time monitoring
For data transfer problems or at the end of data transfer (without end of
data transfer character) data transfer is interrupted after the specified
number of seconds.
The time monitoring is controlled by a time generator (clock) that is star‐
ted with the first character and is reset with each transferred character.
The time monitoring can be set (seconds).
1.
Select the "Program Manager" operating area.
2.
Press softkey "NC" or "Local Drive".
3.
Press the ">>" and "Archive" softkeys.
4.
Select the "V24 settings" softkey.
Window "Interface: V24" is opened.
5.
The interface settings are displayed.
6.
Press the "Details" softkey if you wish to view and process addi‐
tional settings for the interface.
Managing programs
14.19 RS-232-C
833
Advertisement
Table of Contents
