Siemens SINUMERIK 840D sl Turning Operating Manual page 883

Parameter
X3
Z3
Tool change
T
D
F4
X4
Z4
β5
γ5
Tracking
F6
X6
Z6
Y6
Turning
Operating Manual, 06/2019, A5E44903486B AB
Description
3. position (inc or ∅ abs)
3. position (inc or ∅ abs)
● TlChngPt: Approach the tool change point from the last programmed position
and carry out a tool change
● Direct: Tool is not changed at the tool change position, but at the last
programmed position
● No: Tool is not changed
Tool name (not for tool change "no")
Cutting edge number (not for tool change "no")
Feedrate for approach to the fourth position
Alternatively, rapid traverse
4. position (inc or ∅ abs)
4. position (inc or ∅ abs)
Beta angle for 2nd swivel movement
Gamma angle for 2nd swivel movement
The position of the tool tip is maintained during swiveling.
Please refer to the machine manufacturer's instructions.
Feedrate to approach the sixth position
Alternatively, rapid traverse
6. position (inc or ∅ abs)
6. position (inc or ∅ abs)
Retraction to safety clearance
Working with a B axis (only 840D sl)
17.5 Approach/retraction
Unit
mm
mm
mm/min
mm
mm
Degrees
Degrees
mm/min
mm
mm
mm
883